1. Introduction of equipment
The purifier is an integrated purification device specially designed for industrial waste gas to deal with smoke and light particles produced in workshop. The core components of the equipment are mainly activated carbon adsorption purification device and electrostatic adsorption, which can effectively remove the harmful substances and pollution particles in the waste gas, and can also degrade various odor and all kinds of toxic and harmful gases produced by various metal processing plants.
Two. The principle of work
The equipment has air intake and air outlet ends. The exhaust gas is required to enter the medium effect filter plate through the intake air inlet, and some of the dust or particles in the smoke and dust exhaust are first filtered and intercepted, and the smoke and dust gas enters the first stage honeycomb activated carbon filter of the plate frame to carry out the initial filtration and adsorption. At this time, most of the heavier particles are filtered to the surface of the plate frame filter, and the other odor gas containing fine particles is filtered from the outer surface of the inner surface of the plate frame filter through the activated carbon layer and then into the plate frame type two stage honeycomb activated carbon filter for efficient filtration, adsorption and depth. Purify. At this time, most of the tiny particles and dust are filtered to the surface of the plate frame filter, and the untreated odor gas is filtered from the other surface to the outlet from the outer surface of the inner surface of the plate frame filter. The plate frame type activated carbon filter has two stages in series treatment, which effectively expands the contact area of the exhaust gas to the activated carbon, and greatly improves the effect of the adsorption and purification of the exhaust gas, and then the high voltage electrostatic adsorption is used to deal with it.
The initial filtering net plate inside the equipment is fixed in the air inlet position of the equipment. The plate frame filter adopts the drawer style design, and the repair door is set up at the same time, and the plate frame filter can be cleaned, cleaned or replaced. The plate frame filter is installed on the special frame, which consists of a number of activated carbon honeycomb sponges to form a filter unit, forming a multi-level purification unit, and then assembled into a chemical filter section by a number of units. The metal shell of the frame filter is made of metal material and can be reused. This design greatly reduces the operation cost of the user.
Three. Application scope
It is widely used in chemical, electronic, metal processing, tobacco, glass, pharmaceutical, food processing, purification room and other products produced by the production of exhaust gas or stainless steel and pipe processing, aluminum and other metal welding of lead, tin and other flue gas, waste gas or dust or smoke treatment places.